P.O. Box 245, Wyoming, RI 02898     Ph: 401-539-7305 / Fax: 401-539-7861 

About Us
Install Instruc.
What's New


Power CrankTM

      The Power CrankTM is the heart of the steering and suspension system. The primary purpose for creating the Power CrankTM was to eliminate the play that is always found in the steering bell crank!

      The bearing used in the Power CrankTM is either a full length needle roller, or a sealed ball roller bearing. With proper greasing, these bearings will easily outlast the sled they’re installed in. No play in the bellcrank ever!!

      By increasing the length of the drag link arm, the amount of effort required to steer the sled is reduced. Translation - it means that smaller, lighter duty riders can ride longer and faster without becoming as tired.

      Stress relieved, heat treated 4130 chrome moly steel is used in the construction, as well as the heliarc welding. This makes for a stronger piece that is less susceptible to bending than the stock unit.

      A complete Power CrankTM assembly weighs approximately 25% less (except the Arctic Cat) than the factory part they replace. Color coordinated epoxy powder coating makes it an eye catching and attractive component.

Models and Application


Part Number Application
POL/ARM1 Steering Arm, Fits 1994 XCR 600, Fits RXL and XLT 91-94
POL/ARM3 Steering Arm, Fits Twins Including 440 XCR (not Special) through 1994
POL/ARM3* Steering Arm, Fits Twins, (not 440 XCR Special) 1995 on
POL/ARM4* Steering Arm, Fits Storm, 1995 on, Evolved Twin 1995 on
POL/ARM5 Steering Arm, Fits RXL and XLT Extras 1995 thru end
POL/ARM6* Steering Arm, Fits Ultra, 600 XCR, and 600 SP 1996 on (Not CRC Models)

ALL MODELS --- $99.95


Arctic Cat
Part Number Application
CAT/ARM1 Steering Arm, Fits All AWS4 Models
CAT/ARM2 Steering Arm, Fits All AWS5 Models through 1998
CAT/ARM3 Steering Arm, Fits All AWS5 Models 1999 - 2001
CAT/ARM3A & 1 Steering Arm and Idler, Fits All AWS5 Models 1999 - 2001 ($195.00 pr)

Ski Doo
Part Number Application
SKI/ARM Steering Arm, Fits F2000 Chassis and MXZ 1997 on (not CK3)
SKI/ARM2 Steering Arm, Fits CK3 Chassis
SKI/ARM3 MXZ-1999 with rack steering (not new chassis)
SKI/ARM4 MXZ, New Chassis, 1999-2000 with rack steering ($195.00 pr.)

Part Number Application
YAM/ARM1 Steering Arm, Fits 1997-2002 Viper, SX 700 & 600, SRX, and XTC Models
YAM/ARM2 Steering Arm, Fits V-MAX 800 Models
YAM/ARM4 Steering Arm, Fits Viper 2002 ($110.00)